How to Tell a Browning A5 from a Remington Model 11

The Browning Auto-5, commonly written as the A-5 or A5, and the Remington Model 11 are closely related semiautomatic shotguns. Both use John Browning’s long-recoil operating system, and both have the distinctive raised receiver often called a “humpback.” That shared profile makes a quick visual identification unreliable.

The two models were produced for decades in several configurations, including different gauges, barrel lengths, choke arrangements, finishes, and stock styles. Early and late examples can also vary in safety design and other hardware. The most dependable approach combines receiver markings, control placement, barrel details, and photographs of the individual firearm.

For buyers examining a used shotgun, identification matters because model, age, originality, and condition affect value and parts compatibility. A careful inspection can also prevent confusion when comparing listings for Browning shotguns, Remington autoloaders, or related trade-in firearms.

Start With The Shared Long-Recoil Design

Both firearms cycle by allowing the barrel and bolt to move rearward together after firing. This is the defining mechanical relationship behind the two designs, but it is not a practical reason to assume that an unidentified shotgun is either model. The operating system is shared, while many external parts and markings differ.

Both guns generally have a long, sloping receiver that rises toward the rear. This humpback silhouette is the fastest way to recognize the Browning design family, but it cannot distinguish an A5 from a Model 11 by itself. Stocks, barrels, and finishes may also have been replaced over a long service life.

A firearm that appears similar to these models could be a later licensed or derivative version as well. Treat the profile as a starting point, then move to markings and model-specific features before assigning an identity.

Examine The Receiver And Barrel

The receiver is usually the most useful visual area after the markings. A Browning A5 commonly has a smooth, rounded receiver with Browning branding and model information placed on the side. A Remington Model 11 typically carries Remington markings and may identify the manufacturer in larger lettering on the receiver or barrel.

Look for the model name, gauge designation, serial number, and proof or patent information without removing parts. On older shotguns, engraving may be faint, worn, or partly obscured by refinishing. A clean photograph of both receiver sides is often more helpful than a general full-length image.

Barrel markings can provide additional clues, but barrels may have been swapped. Check whether the barrel appears period-correct, whether its finish matches the receiver, and whether the choke description is fixed or modified. For hunting applications, a upland choke guide can help explain why choke information should be treated as a separate feature from model identification.

Compare Controls And External Hardware

Older Browning A5 and Remington Model 11 examples can differ in safety location and configuration. Many classic A5 shotguns are recognized by a safety positioned toward the rear of the trigger guard, while many Model 11 examples use a safety toward the front. This is a useful clue, not an absolute rule, because production changes and replacement trigger groups exist.

The magazine cutoff or shell-stop arrangement may also help. Certain Browning A5 variants have a prominent cutoff control on the left side of the receiver, allowing the user to retain a shell in the magazine while handling the chambered round separately. Remington versions and later variants may have different arrangements or may lack the same visible control.

Magazine caps, fore-end contours, sling swivels, and trigger-guard shapes can support an identification, but they should not outweigh factory markings. A replacement stock or aftermarket barrel can make a correct shotgun look unlike catalog photographs.

Feature Browning A5 Remington Model 11
Basic action Long recoil Long recoil
Recognizable profile Raised “humpback” receiver Raised “humpback” receiver
Typical factory markings Browning and Auto-5/A-5 markings Remington and Model 11 markings
Common safety clue Often positioned toward the rear of the trigger guard on classic examples Often positioned toward the front on classic examples
Production history Browning production began in the early 1900s and continued in several countries and eras Remington production ran primarily from the early 1900s through the mid-20th century
Identification priority Receiver markings, serial information, controls, barrel details Receiver markings, serial information, controls, barrel details

Read The Markings Before Judging Condition

The model designation is more valuable than a resemblance to a photograph. On a Browning, look for “Auto-5,” “A-5,” or related Browning wording, along with the manufacturer’s address and proof marks appropriate to its production period. Belgian-made examples may show Fabrique Nationale or Belgian proof information, while later guns can have different country markings.

A Model 11 should show Remington branding and model information. Some examples may include “Sportsman” designations or other configuration labels. Serial-number ranges can help establish a production period, but interpreting them accurately may require a reputable reference or a qualified gunsmith familiar with older Remington and Browning firearms.

Condition can complicate the picture. Rebluing may soften lettering, polishing can remove proof details, and replacement receivers or barrels are possible on heavily used guns. Photos of the exact firearm are especially important when reviewing a used listing; broad stock images cannot establish whether the pictured markings and hardware belong to the item being sold.

Use A Practical Identification Sequence

Begin with the firearm unloaded and pointed in a safe direction, and do not manipulate an unfamiliar action based only on an online description. If there is any uncertainty about its condition or status, have a qualified gunsmith inspect it. Identification is separate from determining whether an older shotgun is safe to fire.

A useful sequence is to photograph or record the receiver markings, identify the safety position, inspect the left side for a magazine cutoff, and compare the barrel markings with the receiver. Then check whether the stock, fore-end, barrel, and finish appear original or replaced. This process reduces the risk of relying on one easily changed component.

When comparing online listings, review close-ups of the receiver, trigger guard, barrel stampings, serial area, and proof marks. The Browning firearms blog can provide additional background on Browning models, collecting considerations, and shotgun terminology.

Make A Careful Purchase Decision

A correct identification helps you compare like with like, especially when prices differ between an original Belgian A5, a later Browning production model, and a Remington Model 11 with replaced parts. Gauge, barrel length, choke, finish, stock condition, mechanical history, and originality all influence the firearm’s practical and collector value.

Before buying a used example, focus on documentation and transfer details as carefully as the photographs. A reputable listing should describe visible wear honestly, show the specific firearm offered, and provide a clear path for shipment to a Federal Firearms License dealer.

Whether the listing is a Browning A5, a Remington Model 11, or another classic autoloader, careful identification makes the selection process more transparent. Review the specific photographs and condition notes, compare the model details, and arrange delivery to your preferred FFL dealer for lawful local pickup.