Why a used Browning BAR may need a new magazine spring
The Browning BAR is known for smooth operation, dependable cycling, and practical hunting performance. Like any semiautomatic rifle, however, its reliability depends on the condition of several small components. The magazine spring is easy to overlook because it is hidden inside the detachable box magazine, yet it plays a direct role in feeding every cartridge.
A used Browning BAR may have spent years loaded, stored in damp conditions, or repeatedly disassembled for cleaning. Those factors can weaken the spring or cause corrosion that changes how it applies pressure. Replacing the spring is often a relatively simple way to restore consistent feeding, but the rifle should be inspected carefully before any part is ordered.
What the magazine spring does
The magazine spring pushes the follower upward, keeping cartridges positioned beneath the feed lips. When the bolt moves forward, it strips the top round from the magazine and guides it into the chamber. The spring must provide enough upward force throughout the magazine’s capacity, not just when one cartridge remains.
A healthy spring maintains relatively even pressure from the first round to the last. If it has lost tension, the top cartridge may sit too low or fail to rise quickly enough. This can produce failures to feed, bolt-over-base stoppages, or a bolt that closes without chambering a round.
The spring works together with the follower, magazine body, feed lips, and ammunition. A problem that appears to be spring-related can sometimes originate with a bent magazine, damaged follower, dirt, or ammunition that does not match the rifle’s chambering.
Why age and storage matter
Spring steel can gradually lose resilience when compressed for long periods. A magazine that remained fully loaded for years may still function, but it may have less reserve tension than a spring that was stored unloaded. Long-term compression is not the only concern: repeated loading and unloading cycles also contribute to fatigue.
Moisture and residue create additional risks. Surface rust can develop on the spring, especially when a used rifle was stored in a humid safe, carried in wet weather, or cleaned without fully drying the magazine. Rust pits weaken the metal and can make the spring bind against the magazine body.
Some used firearms also change hands without a complete maintenance history. A previous owner may have installed an incorrect replacement spring, modified the magazine, or used a magazine intended for another BAR variant. Confirming the rifle model, caliber, and magazine type is important before selecting a replacement.
Signs of a tired magazine spring
Intermittent feeding problems are among the clearest clues. The BAR may feed the first few rounds correctly and then struggle as the magazine empties. A cartridge may nose-dive, remain low under the feed lips, or fail to rise high enough for the bolt to pick it up.
The follower may also move sluggishly when the magazine is unloaded and safely separated from the rifle. Uneven movement, scraping, or a follower that does not return fully upward can indicate a weak, bent, corroded, or incorrectly fitted spring. These symptoms should be evaluated without ammunition present.
It is also useful to distinguish magazine problems from other causes. A dirty action, damaged extractor, weak ammunition, or issues involving the gas system can create similar cycling symptoms. For background on how related rifle components affect operation, this overview of Browning trigger systems provides useful context, although it does not replace a hands-on inspection of the magazine and action.
Comparing likely causes
Before replacing a spring, examine the complete magazine assembly. Feed lips should be even and free of cracks, the follower should sit level, and the magazine body should not be dented. A replacement spring will not correct a body that prevents the follower from traveling normally.
The following comparison can help separate common symptoms. It is a starting point rather than a definitive diagnosis, since more than one worn component may be present.
| Symptom | Possible cause | What to inspect |
|---|---|---|
| Top round sits low | Weak spring or damaged follower | Spring tension, follower angle, debris |
| Failure occurs near the end of the magazine | Fatigued spring | Performance with different capacities |
| Follower sticks or moves unevenly | Rust, dirt, or bent magazine body | Interior surfaces and follower movement |
| Cartridge noses down | Feed-lip damage or poor spring alignment | Feed lips, spring seating, ammunition |
| Magazine will not lock in place | Incorrect magazine or body damage | Model, caliber, catch area, magazine dimensions |
| Feeding varies between magazines | Individual magazine wear | Compare condition and function of each magazine |
Inspecting a used BAR safely
Begin with the rifle pointed in a safe direction and confirm that it is unloaded. Remove the magazine, open the action, and visually and physically verify the chamber is empty. Magazine inspection should be performed separately from live ammunition, with cartridges stored away from the work area.
Look for reddish discoloration, flaking, kinks, stretched coils, or places where the spring has rubbed heavily against the magazine body. A spring that appears intact can still be weak, so movement and feeding behavior matter as much as appearance. Do not force a follower past a point where it binds, and avoid filing or bending feed lips without the appropriate experience.
Used firearm listings with clear photos and condition notes can help buyers assess external wear, but internal magazine parts are not always visible in catalog images. When reviewing a used Browning BAR, ask for details about included magazines, known feeding issues, and whether the listed magazine is original to the rifle.
Choosing the right replacement
Browning BAR models are not necessarily interchangeable. Differences in caliber, production period, magazine capacity, and action design can affect spring dimensions and follower fit. A spring that appears similar may produce unreliable feeding if its length, wire diameter, or seating points are wrong.
The safest approach is to identify the exact BAR variant and use a manufacturer-approved or reputable replacement part. If the magazine is heavily corroded, dented, or missing its original components, replacing the complete magazine may be more sensible than rebuilding it one part at a time.
A qualified gunsmith can inspect the magazine and rifle together, especially when feeding problems persist after a known-good magazine is tried. Professional service is particularly appropriate when the firearm has been modified, the action shows unusual wear, or the owner is uncertain about disassembly.
Practical checks before buying a spring
A careful check can prevent buying a part that does not address the actual fault. These steps focus on identification and safe evaluation rather than improvised repair:
- Confirm the exact Browning BAR model, caliber, and magazine configuration.
- Compare the suspect magazine with a verified, properly fitting magazine if available.
- Inspect the follower, feed lips, magazine body, and spring for corrosion or deformation.
- Stop using the rifle if cartridges fail to feed consistently or show unusual damage.
- Have a gunsmith verify function after replacing a spring or other magazine component.
A replacement spring should be tested with inert training rounds or under professional supervision before the rifle is relied upon for hunting. Function checks should confirm that the magazine seats correctly, cartridges present at the proper height, and the bolt cycles without abnormal resistance.
A weak magazine spring is a small issue that can have large consequences for reliability. When evaluating a used Browning BAR from Browning Arms Shop, review the listing details, inspect the firearm and magazine carefully after transfer through your chosen FFL dealer, and address questionable feeding before taking the rifle into the field. Browse the available used BAR listings and arrange local pickup through an FFL for a careful, informed purchase.